Additional Materials - 3M DBI-SALA DELTA 1100675 User Instructions

;
Before using this equipment, record the product identification information from the ID label in the "Inspection and
Maintenance Log" at the back of this manual.
System Specifications
Standards:
Component Specifications
Figure 1 Figure 1
Category Reference
1
2
3
Attachment
Elements
4
5
6
7
8
9
Buckles and
10
Adjusters
11
12
13
14
15
Other Elements
16
17
18
19
20
21
Pads
22
23

Additional Materials

Description
Webbing
Stitching
Label Covers
Performance Specifications
Maximum Free Fall Distance:
Maximum Arresting Force:
Maximum Harness Stretch:
Table 1 - Product Specifications
Each product model is certified to, or conforms with, the applicable standards and
regulations listed within Figure 1. If none are listed within Figure 1, then each one listed
on the cover applies.
Description
Dorsal D-ring
Dorsal Web Loop
Sternal D-ring
Hip D-rings
Frontal D-rings
Shoulder D-rings
Rear Waist D-ring
D-ring Extension (Dorsal)
Quick Connect Buckles
Duo-Lok Quick Connect Buckles
Pass-Through Buckles
Tongue Buckles
Parachute Adjusters
Suspension Trauma Straps
Lanyard Keeper
Seat Sling
SRD Loop
Gear Loop
Rescue Loops
Belt
Hip Pad
Back and Shoulder Pad
Leg Pads
Shoulder Pads
Materials
Polyester - 27 kN (6,000 lbf) Tensile Strength
Nylon - 31 kN (7,000 lbf) Tensile Strength
Polyester thread on polyester webbing
Nylon thread on nylon webbing
Blend of nylon and polyester
See the instruction manual of your connecting subsystem for more information on Maximum Free Fall
Distance requirements.
See the instruction manual of your connecting subsystem for more information on Maximum
Arresting Force requirements.
1.5 ft. (45.7 cm)
Materials
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Polyester - 22.2 kN (5,000 lbf) Tensile Strength
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Steel - 22.2 kN (5,000 lbf) Tensile Strength
Polyester - 22.2 kN (5,000 lbf) Tensile Strength
Steel, stainless steel, and alloy steel - 18 kN (4,000 lbf) Tensile
Strength
Steel and alloy steel - 18 kN (4,000 lbf) Tensile Strength
Alloy steel - 18 kN (4,000 lbf) Tensile Strength
Steel and alloy steel - 18 kN (4,000 lbf) Tensile Strength
Aluminum alloy, stainless steel, alloy steel, and nylon - 18 kN
(4,000 lbf) Tensile Strength
Polyester webbing on polyester thread
Injection-molded nylon
Blend of nylon and polyester
Polyester
Polyester
Polyester
Polyester
Blend of nylon and polyester
Blend of nylon and polyester
Blend of nylon and polyester
Blend of nylon and polyester
15