Steps
1. Align the tabs on the fan assembly with the slots on the chassis.
2. Insert the fan assembly at an angle into the slot in the chassis.
3. Install the two (#6-32) screws to secure the fan assembly to the chassis.
4. Connect the fan cable to the connector on the system board.
Next steps
1. Install the
air
shroud.
2. Install the
side
cover.
3. Follow the procedure in
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
air
shroud.
58
Removing and installing components
After working inside your
Before working inside your
computer.
computer.