Dell Precision 5860 Tower Service Manual page 122

Table 6. System setup options—Integrated Devices menu (continued)
Integrated Devices
Table 7. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-0
Type
Device
SATA-1
Type
Device
SATA-2
Type
Device
SATA-4
Type
Device
SATA-5
Type
Device
SATA-6
Type
Device
SATA-7
Type
Device
Slimline SAS PCIE SSD-0
Type
Device
Slimline SAS PCIE SSD-1
122 BIOS setup
By default, the Default option is enabled.
Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
This page allows you to enable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA-0 type information of the system.
Displays the SATA-0 device information of the system.
Displays the SATA-1 type information of the system.
Displays the SATA-1 device information of the system.
Displays the SATA-2 type information of the system.
Displays the SATA-2 device information of the system.
Displays the SATA-4 type information of the system.
Displays the SATA-4 device information of the system.
Displays the SATA-5 type information of the system.
Displays the SATA-5 device information of the system.
Displays the SATA-6 type information of the system.
Displays the SATA-6 device information of the system.
Displays the SATA-7 type information of the system.
Displays the SATA-7 device information of the system.
Displays the slimline SAS PCIE SSD-0 type information of the system.
Displays the slimline SAS PCIE SSD-0 device information of the system.