Bottom Air-Shroud; Removing The Bottom Air-Shroud; Installing The Bottom Air-Shroud - Dell Precision 5860 Tower Service Manual

Bottom air-shroud

Removing the bottom air-shroud

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following image indicates the location of the air shroud and provides a visual representation of the removal procedure.
Steps
1. Release the cables from the front chassis.
2. Pull and release the tab on the bottom air-shroud cover and remove the cover from the computer.
3. Remove cables from the routing guides on the system board.
4. Remove the two (M3x5) screws that secures the bottom air-shroud to the system board.
5. Remove the bottom air-shroud upwards and out of the computer.

Installing the bottom air-shroud

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the air shroud and provides a visual representation of the installation procedure.
Before working inside your computer.
Removing and installing components 51