Installing The 2.5-Inch Hard-Drive Assembly - Dell Precision 5860 Tower Service Manual

Steps
1. Place the hard drive into the hard-drive bracket and align the tabs on the bracket with the slots on the hard drive.
2. Snap the hard-drive into the hard-drive bracket.
Next steps
1. Install the 2.5-inch hard-drive
2. Install the side cover.
3. Follow the procedure in

Installing the 2.5-inch hard-drive assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 2.5-inch hard-drive assembly and provide a visual representation of the
installation procedure.
assembly.
After working inside your computer.
Removing and installing components 47