Installing A 2.5-Inch Hard-Drive From A Hard-Drive Assembly - Dell Precision 5860 Tower Service Manual

Steps
1. Pry the sides of the external hard-drive bracket to release the pins on the bracket from the slots on the hard drive.
2. Lift and remove the hard drive off the external hard-drive bracket.

Installing a 2.5-inch hard-drive from a hard-drive assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of a 2.5-inch hard-drive in a hard-drive assembly and provide a visual representation
of the installation procedure.
24 Removing and installing components