Fronius Symo Advanced 10.0-3-M Operating Instructions Manual page 78

78
An overview of the values that can be
changed is displayed.
Use the "Up" and "Down" keys
3
"Set time"
Press the "Enter"
4
The current time appears. (HH:MM:SS, 24-
hour clock), the "tens" digit for the hour will
flash.
Use the "Up" and "Down" keys
5
lect a value for the first digit of the code
Press the "Enter"
6
The "units" digit for the hour will flash.
Repeat steps 5 and 6 to set the "units"
7
digit for the hour, for the minutes and for
the seconds until...
the set time starts flashing.
Press the "Enter"
8
The time is applied and the overview of val-
ues that can be changed is displayed.
Press the "Esc" key
4
The "Clock" item on the Setup menu ap-
pears.
Select
key
to se-
key
key