Section 1 Introduction And Safety; Introduction; Read This Manual Thoroughly; Safety Messages - Generac Power Systems Power Zone Pro Owner's Manual

Section 1 Introduction and Safety

Introduction

Thank you for purchasing a Generac Power Systems,
Inc. product. This unit has been designed to provide high
performance, efficient operation and years of use when
maintained properly.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.

Read This Manual Thoroughly

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
If any section of the manual is not understood, contact
your nearest Independent Authorized Service Dealer
(IASD), or contact Generac Customer Service at 1-888-
GENERAC (1-888-436-3722), or
with any questions or concerns. The owner is responsible
for proper maintenance and safe use of the equipment.
Save these instructions for future reference. This manual
contains important instructions for the controller that
should be followed during installation, operation and
maintenance of the controller. Always supply this manual
to any individual that will use this device.
NOTE: Contact an IASD for manuals referred to within
this manual.
IMPORTANT NOTE: Use this manual in conjunction
with the appropriate generator owner's manual.
Owner's Manual for Power Zone Pro Main Controller

Safety Messages

Throughout this publication and on tags and decals
affixed to the unit, DANGER, WARNING, and CAUTION
blocks are used to alert personnel to special instructions
about a particular operation that may be hazardous if
performed incorrectly or carelessly. Observe them
carefully. Their definitions are as follows:
(000100a)
www.generac.com
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
The operator is responsible for proper and safe use of
the equipment. The manufacturer strongly recommends
that if the operator is also the owner, to read the owner's
manual and thoroughly understand all instructions before
using this equipment. The manufacturer also strongly
recommends instructing other users on how to properly
start and operate the unit. This prepares them if they
need to operate the equipment in an emergency.
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Introduction and Safety
(000001)
(000002)
(000003)
1