Generac Power Systems Power Zone Pro Owner's Manual page 14

General Information
AC Voltage Sensing Inputs (6)
Number of channels
Maximum working voltage
Frequency
AC Current Sensing Inputs (3)
Number of channels
Nominal current rating
Maximum current rating
Frequency
Input impedance
RPM Sensor Inputs (1)
Number of channels
Input type
Maximum sensor voltage
Minimum sensor voltage
Maximum input current
NOTE: The communications cables should not be run in the same conduit or in the same wire grouping as any high
voltage or high current conductors.
NOTE: The communications baud rates should be selected to be compatible with other components connected to the
communications bus.
10
6 + 2 neutral references
600 Vrms ph-ph
50 or 60 Hz
3
0-1 A rms
3.5 A rms
50 or 60 Hz
0.1 Ohms
1
Variable reluctance magnetic pickup
± 250 V
± 135 mV
10 mA
Owner's Manual for Power Zone Pro Main Controller