Fujitsu IP-920E Hardware User's Manual page 46

Table of Contents

Advertisement

Chapter 2 Installation and Connection
Safety installation instruction:
1) Multiple pile
The maximum 5 IP-920E/IP-920D can be piled under the environment
condition specified. Please install considering the maintenance-ability.
When IP-920E/IP-920D are piled, please fix them to avoid to fall (Do not
cover the air intake.). Refer to Section 2.1.4, "Open space required around
this equipment" for the installation space.
2) rack mounting
a) When IP-920E/IP-920D is installed in a closed or multiple equipment
b) The installation of IP-920E/IP-920D in a rack should be such that the
c) The mounting of IP-920E/IP-920D in a rack should be such that a
d) When using a bracket for mounting two products and you remove one
IP-920E/IP-920D
rack, the operating ambient temperature inside of the rack
environment may be greater than room ambient.
consideration should be given to operate in the environment
compatible with the specifications in Appendix 2.2 "Environment
Specifications."
The consideration for adjustment of the air condition such as air
-
circulation should be given to prevent the internal rack ambient
from exceeding the maximum operating ambient temperature of
IP-920E/IP-920D.
-
The maximum operating ambient temperature for IP-920E/
IP-920D: 55°C.
amount of airflow required for safe operation of IP-920E/IP-920D is
not compromised.
-
IP-920E/IP-920D has ventilation opening at the right and rear side.
-
Do not cover or close these ventilation openings to prevent
overheating.
hazardous condition in not archived due to uneven mechanical loading.
To keep stability of the entire rack, please fix the rack to wall or floor
by suitable means.
-
Be careful about injury during installation of IP-920E/IP-920D
into rack.
-
Do
not
install
IP-920E/IP-920D may make the entire rack unstable.
The weight of IP-920E/IP-920D with the maximum configuration:
-
2.3 kg
product, do not leave the remaining one that is fixed at one end only
unattended. If you apply pressure to a product that is supported at
one end only, it may deform the mounting bracket.
IP-920E/IP-920D
into
32
Therefore, the
your
rack
where

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip-920d

Table of Contents