Table of Contents
Advertisement
Chapter 1 Preparations
1.4
1.4
This section gives the name and describes the function of individual parts of IP-920E/IP-920D.
The diagrams below show the layout of parts on the outside of this equipment, and the table below
lists the name and describes the function of individual parts.
- IP-920E
Part names
No.
Name
Power inlet connector
(1)
(INPUT 100-240VAC)
Power button
(2)
Power LED (PWR)
(3)
Status LED
(4)
(RDY)
Alarm LED
(5)
(ALM)
AV input status LED
(6)
(INDWN)
Option LED
(7)
(OPT)
LAN port
(8)
(10/100BASE)
Speed LED
(9)
(100M)
Status LED
(10)
(LINK/ACT)
IP-920E/IP-920D
Part Names
Figure Front panel
(1)
(2)
100-240V
Figure Rear panel
(18)
CF CARD
11
AUX
(19)
(20)
Can be connected to a 100-240VAC commercial power supply by using power
card with a standard two-prong plug with ground.
Refer to Section 2.2.2, "Connection to a Power Source," for an explanation on
using this connector. Refer to Section 4.2, "Cable and Connector Details," for
cable connection information.
Turns this equipment on and off.
Turns on when this equipment is turned on.
Turn on when IP-920E power is on. For more information, refer to Table 5.3,
"Details of LED Indications," in Section 5.2.
Turns on when IP-920E operation is abnormal. For more information, refer to
Table 5.3, "Details of LED Indications," in Section 5.2.
Audio/Video input setting status indicator and LED that indicates the input off
status during input setting. For more information, refer to Table 5.3, "Details of
LED Indications," in Section 5.2.
Turn on when option license is installed. For more information, refer to
Software guide.
Ethernet 10BASE-T/100BASE-TX communication port. Refer to Section 2.4,
"Connection to a Network," for an explanation on using this port. Refer to
Section 4.2, "Cable and Connector Details," for cable connection information.
Indicates the status of LAN port. For more information, refer to Table 5.3,
"Details of LED Indications," in Section 5.2.
Indicates the speed of LAN port. For more information, refer to Table 5.3,
"Details of LED Indications," in Section 5.2.
(8) (9)
(10)
(3) (4) (5) (6)
(7)
10/100BASE
E
100M
PWR ALM
OPT
LINK
RDY
IN
/ACT
DWN
FG
MNT
(13)
(14)
(15)
(16)
(3) (4) (5) (6) (7) (9)
E
PWR ALM
OPT
LINK
RDY
IN
100M
DWN
Description
6
(11)
(12)
RS-232C
ANALOG AUDIO IN
(17)
(10)
/ACT
Advertisement
Table of Contents
