Table of Contents
Advertisement
No.
Names
Maintenance mode switch
(13)
(MNT)
HDMI output
(14)
(HDMI)
SDI video output
(15)
(SDI)
Video output
(16)
(ANALOG VIDEO OUT)
AUX port
(17)
(AUX)
(18) Test port
terminal.
IP-920E start mode selector switch. When the IP-920E is turned on with this
switch held down, it starts in initial start mode.
Refer to Section 3.3, "Special Use of MNT Button," for an explanation on using
this switch.
Digital HDMI video output terminal. 50Ω unbalanced.
Refer to Section 2.3, "Audio and Video Device Connections," for an explanation
on using this terminal. Refer to Section 4.2, "Cable and Connector Details," for
cable connection information.
Digital HD-SDI video output terminal. 75Ω unbalanced.
Refer to Section 2.3, "Audio and Video Device Connections," for an explanation
on using this terminal. Refer to Section 4.2, "Cable and Connector Details," for
cable connection information.
Analog video output terminal. 75Ω unbalanced.
Refer to section 2.3, "Audio and Video Device Connections," for an explanation
on using this terminal. Refer to Section 4.2, "Cable and Connector Details," for
cable connection information.
Auxiliary port.
Factory test port.
9
Chapter 1 Preparations
Description
IP-920E/IP-920D
Advertisement
Table of Contents
