Mitsubishi Heavy Industries SC-WBGW256 Configuration Manual page 6

(3) To get the IP Network Configuration screen, In the Basic Configuration Menu screen in the Configuration Menu,
click "Network Configuration".
Fig. 4 shows the Network Configuration screen.
(4) Fill in each field to be changed and click set button. After confirmation, the gateway will be rebooted automatically.
Attention:
･IP address 0.*.*.*, 127.*.*.*, 224.*.*.* to 255.*.*.*
can't be used due to reservations.
･Don't input more than a four-digit number for each octet.
Ex: Correct:192.8.100.110
･Subnet mask must contain only binary bit"1" from left side.
Ex: Correct:255.255.255.0
(5) After the gateway restarts, the gateway will work as the new configuration as follows;
Fig. 4 Network Configuration screen
IP address :
Subnet mask :
Default Gateway :
WEB Server URL :
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0
Incorrect:192.8.0100.110
Incorrect:192.255.255.0
XXX.XXX.XXX.XXX
YYY.YYY.YYY.YYY
ZZZ.ZZZ.ZZZ.ZZZ
http://XXX.XXX.XXX.XXX
6
Document No. ISTZ17022 June 1, 2017
/en/