Pulse Count & Di Status Check Screen - Mitsubishi Heavy Industries SC-WBGW256 Configuration Manual

SC-WBGW256 Configuration Manual(BACnet) Ver.1.0
Document No. ISTZ17022 June 1, 2017
12 Pulse count & DI status Check screen
You can check the total number of input pulses (updated every 1 minute) of the pulse input terminals (P1 to P8) and the
input state (Open / Close) of the contact signal input terminals (DI1 to DI3).
To get the Pulse count & DI status Check screen, click the "Pulse count & DI status Check" in the Basic Configuration
Menu screen in the Configuration Menu screen. Fig.17 shows the Pulse count & DI status Check screen.
When the "Reset" button is clicked, the display value of the pulse number becomes 0.
This screen is a test screen for checking the operation of the terminals, and resetting the number of pulses displayed does
not affect information calculated internally at all.
Fig. 17 Pulse count & DI status Check screen
24