Authentication Configuration - Mitsubishi Heavy Industries SC-WBGW256 Configuration Manual

10 Authentication Configuration

This screen is used to set and change the User ID and Password for logging in to the gateway.
(1) To get the Authentication Configuration screen, click the "Authentication Configuration" in the Basic Configuration
Menu screen in the Configuration Menu screen. Fig.15 shows the Authentication Configuration screen.
(2) Input the User ID and Password of each Authentication, and click the "Set" button.
Input the User ID using 4-16 one-byte alphanumeric characters and the Password using 6-16 one-byte alphanumeric
characters.
Fig. 15 Authentication Configuration screen
22
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0
Document No. ISTZ17022 June 1, 2017