9 Security Configuration
This screen is for specifying the IP address of the computer that allows the gateway to log in.
No addresses are set at the factory, so any computer with any IP address can access the gateway. However, if even one
IP address is entered in this screen for which access is permitted, the gateway can be accessed from only the computer
with that address.
(1) To get the Security Configuration screen, click the "Security Configuration" in the Basic Configuration Menu screen
in the Configuration Menu screen. Fig.14 shows the Security Configuration screen.
(2) Input the IP address of the computer for which access is permitted, and click the "Set" button.
Fig. 14 Security Configuration screen
21
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0
Document No. ISTZ17022 June 1, 2017