Document No. ISTZ17022 June 1, 2017 1 Scope This manual is applied to the configuration setting of the " WEB & BACnet Gateway", Model SC-WBGW256. Any contents of this document may be changed without prior notification. 2 Configuration Tool Computer 2.1 Connection Diagram...
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 2.3 IP Network Configuration (0) At the factory, the gateway has been set the default network configuration as follows; IP address 192.168.0.110 Subnet mask 255.255.255.0 Default Gateway 192.168.0.1 WEB Server URL http://192.168.0.110/en/...
Page 5
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 Fig. 3 Configuration Menu screen...
Page 6
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 (3) To get the IP Network Configuration screen, In the Basic Configuration Menu screen in the Configuration Menu, click “Network Configuration”. Fig. 4 shows the Network Configuration screen. Fig. 4 Network Configuration screen (4) Fill in each field to be changed and click set button.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 (6) You can set the Network Configuration (IP address, the subnet mask and default Gateway), Security Configuration , login ID setting (user ID and password) to the factory default status by the following procedure.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 4 BACnet Configuration BACnet configuration such as the Device Instance No., BACnet Port No., or etc. can be changed. (1) In the BACnet Configuration Menu screen in the Configuration Menu screen, click the “BACnet Configuration”.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 5 OBJECT INSTANCE NO. ALLOCATION The BACnet standard defines the format of the BACnet Object Identifier as shown in the following diagram. That is, the 32 bits of the BACnet Object Identifier consists of the higher 10 bits of the BACnet Object Type and the lower 22 bits of the Instance No.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 6 BACnet service Startup Configuration BACnet configuration such as the BACnet transmission start delay can be selected. About 1 minute later, BACnet transmission starts (Factory setting) or about 3 minute later, BACnet transmission starts (select the check box) can be selected.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 7 Air-con CELL Configuration Each BACnet objects are linked to a logical unit named “Air-con Cell”. The Air-con Cell configuration, that is the relationship between the Superlink address and the Cell No., can be set by accessing the WEB Server embedded in the gateway.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 7.1.3 Air-con Cell Number (CELL No.) The gateway performs monitoring and control by the cell number. The cell numbers C000~C255 are assigned to the indoor units specified by the SL system number and SL Address.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 7.2 PACinfo256.csv (PACinfo256.xml) File PACinfo256.csv and PACinfo256.xml are exclusive to the gateway. The setting information in the Air-con Cell Configuration screen can be downloaded from the Air-conditioner Cell Configuration File Upload/Download screen and the file can be saved to the computer. This file is called PACinfo256.csv or PACinfo256.xml.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 7.3 Upload / Download of Air-conditioner Cell Configuration File The Air-conditioner Cell Configuration file can be uploaded and downloaded as a CSV format. (1) To get the Air-conditioner Cell Configuration File Upload/Download screen, click the “Air-conditioner Cell Configuration File Upload/Download”...
The System time of the gateway will be set to the date and time. Fig. 13 Date and Time Configuration screen Note: When a BACnet device, which sends TimeSynchronization Service periodically, is connected to the network, SC-WBGW256 adjusts date and time itself automatically.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 9 Security Configuration This screen is for specifying the IP address of the computer that allows the gateway to log in. No addresses are set at the factory, so any computer with any IP address can access the gateway. However, if even one IP address is entered in this screen for which access is permitted, the gateway can be accessed from only the computer with that address.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 10 Authentication Configuration This screen is used to set and change the User ID and Password for logging in to the gateway. (1) To get the Authentication Configuration screen, click the “Authentication Configuration” in the Basic Configuration Menu screen in the Configuration Menu screen.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 11 Language Configuration This screen is used to switch the display language, and to upload or download the language configuration file (“language.xml”). The language configuration file is in the XML file format. This file is a comparison list of English and the user's language. It is possible to edit this file with spreadsheet software, etc.
SC-WBGW256 Configuration Manual(BACnet) Ver.1.0 Document No. ISTZ17022 June 1, 2017 12 Pulse count & DI status Check screen You can check the total number of input pulses (updated every 1 minute) of the pulse input terminals (P1 to P8) and the input state (Open / Close) of the contact signal input terminals (DI1 to DI3).