Table of Contents
Advertisement
During rinsing, a little hot water flows from the coffee spouts
(A11). Avoid contact with splashes of water.
•
To turn the appliance off, press the
8).
•
The message "Turning off, Please wait" appears on the dis-
play (B4), then the appliance performs a rinse cycle and
goes off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
•
first turn the appliance off by pressing the
(fig. 8);
•
release the main switch at the side of the appliance (fig. 2).
Important!
Never press the main switch while the appliance is on.
8. MENU SETTINGS
8.1 Rinsing
Use this function to deliver hot water from the coffee spouts
(A11) and hot water spout (C6), if inserted, to clean and heat
the appliance's internal circuit. Place a container with a mini-
mum capacity of 100ml under the coffee and hot water spouts.
To enable the function, proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press < (B12) or > (B8) (fig. 9) until "Rinsing" appears on the
display (B4);
3. Press the
button (B5). The message "Confirm?" is
displayed;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the
button (fig. 3): after a few seconds, hot
water is delivered first from the coffee spouts (A11) and
then from the hot water spout (C6) (if inserted). This cleans
and heats the appliance's internal circuit.
Please note!
•
To stop delivery at any time, press any button.
•
If the appliance is not used for more than 3-4 days, we
strongly recommend, when switching on the appliance,
performing 2/3 rinses before using it.
8.2 Descale
For instructions on descaling, see section "13. Descaling".
8.3 Install filter
For instructions on how to install the filter (C4), see section "15.1
Installing the filter".
8.4 Replacing the water softener filter (if
button (A23) (fig.
For instructions on how to replace the filter (C4), see the section
"15.2 Replacing the filter".
8.5 Adjust time
To adjust the time on the display (B4), proceed as follows:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press < (B12) or > (B8) (fig. 9) until "Adjust time" is
3. Press the
button
4. Press < or > (fig. 8) to change the hour;
5. Press the
6. Press < or > (fig. 9) to change the minutes;
7. Press the
The time is set. Press the MENU/ESC button to exit the menu.
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
To enable this function, the time must already be set correctly.
Per attivare l'autoaccensione, procedere come segue:
1. Press the MENU/ESC button (B3) to enter the menu;
2. Press < (B12) or > (B8) (fig. 9) until "Auto-start" appears
3. Press the
4. Press the
5. Press < or > to choose the hour;
6. Press the
7. Press < or > to change the minutes;
8. Press the
9. Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, activation of auto-start is
indicated by the
To disable the function:
1. Select auto-start from the menu;
2. Press the
3. Press the
The
8.7 Auto-off
When this function is enabled:
-
31
installed)
displayed;
button (B5) (fig. 3): the hours flash on
the display;
button to confirm. The minutes flash;
button to confirm.
Please note!
on the display (B4);
button (B5). "Enable?" appears on the
display;
button to confirm;
button to confirm;
button to confirm;
symbol displayed alongside the time.
button. "Disable?" appears on the
display;
button to confirm.
symbol is no longer displayed.
the appliance goes off completely automatically when the
main switch (A20) is released. To turn the appliance on
Advertisement
Chapters
Table of Contents
Troubleshooting
