DeLonghi ETAM36.36 Series Instructions For Use Manual page 44

The coffee is delivered too slowly or a
drop at a time.
Coffee does not come out of one or
both of the spouts.
Milk is not delivered from the milk
spout
The milk contains
large bubbles and
squirts out of the
milk spout (D5) or
there is little froth
The milk contains
large bubbles and
squirts out of the
milk spout or there
is little froth
The appliance does not come on
The infuser cannot be extracted
The coffee is ground too finely.
The coffee spouts (A11) are blocked.
The milk container lid (D2) is dirty
The milk is not cold enough or is not
semi-skimmed.
The froth adjustment dial (D1) is incor-
rectly adjusted.
The milk container lid (D2) or froth
adjustment dial (D1) on the milk con-
tainer (D) is dirty.
The hot water/steam connection noz-
zle (A12) is dirty.
The hot water/steam spout (C6) is
dirty.
The power cord (C8) connector is not
inserted correctly.
It is not plugged into the mains socket.
The main switch (A20) is not turned on.
The appliance has not been turned off
correctly
44
Turn the grinding adjustment dial (A6) one
click anticlockwise towards 7 while the coffee
mill is in operation (fig. 13). Continue one click
at a time until coffee delivery is satisfactory.
The effect is only visible after delivering 2
coffees (see section "9.4. Adjusting the coffee
mill").
Clean the spouts with a toothpick (fig. 33).
Clean the milk container lid as described in sec-
tion "12.10 Cleaning the milk container".
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
Adjust according to the instructions in section
"10.2 Adjusting the amount of froth".
Clean the milk container lid and dial as de-
scribed in section "12.10 Cleaning the milk
container".
Clean the connection nozzle as described in
section "12.11 Cleaning the hot water/steam
connection nozzle".
Clean as described in section "11.5 Cleaning
the spout after use".
Insert the connector as far as it will go in the
socket (A13) at the back of the appliance (fig.
1).
Plug into the mains socket (fig. 1).
Press the main switch (fig. 2).
Turn the appliance off by pressing the
ton (A23) (section "7. Turning the appliance off").
but-