Embroidery Preparation; Attaching The Module; Preparing The Machine; Lowering The Feed Dog - Bernina 735 User Manual

13 Embroidery preparation

13.1 Attaching the Module

Transporting the Embroidery Module
NOTICE
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
Prerequisite:
• Extension table must not be fitted.
> Make sure that the module and the machine are placed on a stable, even surface.
> Ensure that the embroidery arm can move freely.
> Lift the embroidery module on the left side.
> Carefully push the module from left to right into the embroidery module connection (1) of the machine.
> To remove, lift the embroidery module on the left and carefully pull to the left.

13.2 Preparing the Machine

Lowering the feed dog

> Push the button «Feed Dog Up/Down».
1
1
Embroidery preparation
121