Table of Contents
Advertisement
Creative Embroidering
Prerequisite:
•
•
> Select the embroidery design.
> Tap «i-Dialog».
> Tap «Pinpoint Placement».
> Tap «Free Point Positioning».
> To prevent the size of the embroidery design from being changed when positioning the points, tap
> Define a desired point within the embroidery design.
> Turn the «Upper Multi-function Knob» or the «Lower Multi-function Knob» to the left or to the right to
> To confirm the changed position, tap «Set».
SET
> Select the second positioning point of the embroidery design.
> Turn the «Upper Multi-function Knob» or the «Lower Multi-function Knob» to the left or to the right to
> To confirm the changed position, tap «Set».
> To reset the changes and revert to the default settings, tap «Reset Pinpoint Placement».
15.7 Combining Embroidery Designs
Combining Embroidery Designs
In the Combi-mode several embroidery designs can be combined.
> Select the embroidery design.
140
Any two points of the embroidery design are marked with chalk or a water-soluble pen on the fabric. The
place or the location where the embroidery design is to be positioned is clearly visible.
The hoop in use is selected.
«Scale the Size of Embroidery Motif».
– The positioning point is displayed.
position the needle above the respective mark on the fabric.
– The point changes color and is set.
position the needle above the respective mark on the fabric.
– The point changes color and is set. The embroidery design is adjusted accordingly.
Advertisement
Table of Contents
