Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dnake E211
Summary of Contents for Dnake E211
- Page 1 User Manual ——— DNAKE E211...
- Page 3 REMARK Please follow the user manual for correct installation and testing. If there is any doubt please call our tech-supporting and customer center. Our company applies ourselves to reformation and innovation of our products. No extra notice for any change. The illustration shown here is only for reference. If there is any difference, please take the actual product as the standard.
-
Page 4: Table Of Contents
CATALOG PRODUCT FEATURE ..........1 TECHNICAL PARAMETER ........1 PACKAGE CONTENT ..........2 OVERVIEW .............. 3 BASIC OPERATION ..........7 WEB SETTING ............9 SYSTEM DIAGRAM ..........21 DEVICE WIRING ........... 22 INSTALLATION ............25 TROUBLESHOOTING ........... 29 SAFETY INSTRUCTION ........30... -
Page 5: Product Feature
2. Fade-resistant keys 3. Fully functional 4. Surface mountable 5. Optional handset 6. Optional Wi-Fi 7. Model Description: E211 (Standard); E211W (Wi-Fi); E211H (Handset); E211A (Wi-Fi + Handset) TECHNICAL PARAMETER System: Linux Front Panel: Plastic Power Supply: PoE (802.3af) or DC 12V/2A Standby Power: 1.5 W... -
Page 6: Package Content
PACKAGE CONTENT MODEL: E211/E211W (No handset) E211 Bracket PM4×20 (2 pcs) Diode (8 pcs) Wires Quick Start Guide MODEL: E211H/E211A (With handset) E211 Bracket PM4×20 (2 pcs) Diode (8 pcs) Wires Quick Start Guide Handset... -
Page 7: Overview
OVERVIEW... - Page 8 Note: 1. DND Short press to turn on/off do not disturb when on standby and no alarm detected. (Backlight will keep on when DND is enabled. No calls can call in and DND on the device is only for enabling the whole day or disabling. The duration of DND can only be configured on the web.) 2.
- Page 9 a. Short press to call Master Station; (Backlight of Answer/Hang up will flash. Ringback tone can be heard.) b. Long press 2s to send SOS; (Backlight will keep on for 2s. SOS can be initiated anytime.) 6. Answer/Hang up a. Short press to answer when ringing; (Backlight will stop flashing and keep on.) b.
- Page 10 9. Microphone Mute ( ) + Volume Increase ( Long press and hold “ ” and “+” simultaneously to turn on/off defense. (Backlight of LED indicator light below will keep flashing. And Indoor Monitor will make a beep sound.)
-
Page 11: Basic Operation
Log in the device’s web configuration page with account (user) and password (1234). Click QR Code and scan by DNAKE Smart Life app to add this Indoor Monitor to your phone. Only when the license is filled in Internet-connected Indoor Monitor, QR code will be available. - Page 12 Or go to Indoor Monitor’s webpage and find Ex Phone in Intercom > Call. Users can directly extend to more Indoor Monitors by filling in sip:IP address (6 Max) such as sip:192.168.68.90. (Please refer to WEB SETTING for the way to access to webpage)
-
Page 13: Web Setting
IP address of Indoor Monitor in the web browser search bar and log in with the default account (admin) and password (123456). This is where you can configure the device. To get the IP address, you can search by DNAKE Remote Upgrade Tool installed in the same LAN with the devices. 1. General 1.1. - Page 14 Model: Model of the device; Firmware Version: Firmware version of the device; MAC Address: MAC address of the device; Framework: Framework of the device; UI of the device; DHCP: Status of DHCP; IP Address: Current IP address of the device; Mask: Subnet mask of the device;...
- Page 15 Language: 16 languages supported (简体中文, English, 繁體 中文, ,ﬠ ִ בר ִ יתDeutsch, Español, Türk, Tiếng Việt, Nederlands, Português, Polski, Русский, ,ﻋرﺑﻲ Français, Italiano, slovenský); System Vol: Volume of System can be set from 1 to 6. Volume 6 is the maximum volume (Key tone); Intercom Vol: Volume of Intercom can be set from 1 to 6.
- Page 16 The System password is for the administrator to log in settings on the device while the Web password is for the administrator to log in settings on the web. The default password for both of them is 123456. User for Indoor Monitor is the security password whose default password is 1234.
- Page 17 Reset: Reset to factory settings; Reboot: Reboot the device; 2. Intercom 2.1. Intercom > Device Numbers here are basic settings for making a call to Indoor Monitor. For Door Station, the building and unit number should be the same as those in Indoor Monitor.
- Page 18 Building: Number of the building (Range: 1-999); Unit: Number of the unit (Range: 0-99); Room: Number of the apartment (Range: 0-9899); Device No: Number of the device (Range: 0-9); Sync: A number used to synchronize to other Indoor Monitors; 2.2. Intercom > Network The device network can be set to either DHCP or a static IP address.
- Page 19 DHCP: Enable DHCP (Dynamic Host Configuration Protocol) to dynamically distribute network configuration parameters; IP Address: Configure Static IP address to manually distribute network configuration parameters; Mask: Subnet mask; Gateway: A component that is part of two networks, which use different protocols; DNS: Domain Name Server of the device;...
- Page 20 Outbound Proxy: Outbound Proxy server; the default port is 5060; Transport Protocol: Transport Protocol (UDP, TCP, TLS); Video Payload: Video payload range is 96-127; 2.4. Intercom > Call Ring group is for setting up SIP calls or call mode. Concierge button, extension of other Indoor Monitors, the length of the call, and ring time can also be configured here.
- Page 21 Search: Fill in text inputs to search; Reset: Click reset to clear words in text inputs; Delete All: Delete all data on the chart; Export: Export all data on the chart; 3. Security 3.1. Security > Zone Zone column is the setup page for security sensors. Type: •...
- Page 22 o 100 seconds is the default activation time, it means the alarm will be activated after 100 seconds. o After 100s, once sensor is triggered, Indoor Monitor will send this alarm to Master Station. o But sometimes users don't want to send the alarm to Master Station (maybe alarm by mistake), users can set the Delay time, so they can cancel the alarm in the Indoor...
- Page 23 Activation Time: Only after activation time, will scene be activated. Activation time is only effective for Normal type (NONE, 30s, 40s, 60s, 100s, and 300s); Mode: Tick to link sensors to scene; 4. Advanced 4.1. Advanced > Relay Relay column is for Local Relay and Door Relay. Unlock Button 1-3: Enable or disable relays for unlock buttons;...
- Page 24 Type: Type 1-3: 3 types of unlock way are optional (Local Relay/DTMF/HTTP) HTTP——the format is http://192.168.3.119/cgi- bin/webapi.cgi?api=unlock&index =2&username=admin&password =E10ADC3949BA59ABBE56E057F20F883E; Note: • "192.168.3.119" is the IP address of Door Station; • The number "2" after "index=" is the number for relay. (Relay 1 is 0; relay 2 is 1; relay 3 is 2); •...
-
Page 25: System Diagram
SYSTEM DIAGRAM... -
Page 26: Device Wiring
DEVICE WIRING 1. Network (PoE) Standard RJ45 interface used to connect to the Master Station, Indoor Monitor and/or other network equipment via a network switch. PSE shall comply with IEEE 802.3at (PoE+) and its output power not less than 30W and its output voltage not be less than 50V. 2. - Page 27 Warning! 1. When connecting to an inductive load device such as a relay or electromagnetic lock, you are recommended to use a diode 1A/400V (included in the accessories) in anti- parallel with the load device to absorb inductive load voltage peaks.
-
Page 29: Installation
INSTALLATION Surface Mounting-86 Mounting Box (E211/E211W) Product size: 100 × 184 × 25 mm Surface Mounting size: 100 × 184 × 28 mm... - Page 30 Surface Mounting-118 Mounting Box (E211/E211W) Product size: 100 × 184 × 25 mm Surface Mounting size: 100 × 184 × 28 mm...
- Page 31 Surface Mounting-86 Mounting Box (E211H/E211A) Product size: 100 × 184 × 25 mm Surface Mounting size: 100 × 184 × 28 mm...
- Page 32 Surface Mounting-118 Mounting Box (E211H/E211A) Product size: 100 × 184 × 25 mm Surface Mounting size: 100 × 184 × 28 mm Tips: The camera should be 1450~1550mm above the ground. The camera at this height can capture human face perfectly.
-
Page 33: Troubleshooting
TROUBLESHOOTING The Indoor Monitor cannot start up or power off automatically. Check whether it has power-failure, and power it on again The Indoor Monitor display screen is too dim. Check whether the brightness and contrast settings of screen are correct. ... -
Page 34: Safety Instruction
SAFETY INSTRUCTION In order to protect you and others from harm or your device from damage, please read the following information before using the device. Do not install the device in the following places: Do not install the device in high-temperature and moist environment or the area close to ... - Page 35 V1.2 EASY SMART INTERCOM SOLUTIONS...
Need help?
Do you have a question about the E211 and is the answer not in the manual?
Questions and answers