INVENTOR CF-ION-10L User Manual page 28

There is a kerosene heater or something giving off water vapor in the room.
l
The room that the device is placed is bigger than suggested.
l
The humidity level is too high.
l
The unit makes a loud noise when operating
The air filter is clogged.
l
The device is tilted instead of being in an upright position.
l
The floor surface is not flat.
l
Frost build up on coils
This is normal. This unit is supplied with an Auto defrost feature.
l
Drain hose water leakage
Check the correct installation of the drain hose.
l
Check for any blockage or damage of the drain hose.
l
Understanding Error code indications
EH60-Humidity sensor error- Unplug the unit and plug it back in. If error repeats, call for
service;
EH61-Tube Temperature sensor of the evaporator error-- Unplug the unit and plug it back
in. If error repeats, call for service;
EH02-Zero-crossing signal detection error; If error repeats, call for service;
EH03-Indoor fan speed malfunction; If error repeats, call for service;
EH0b-Indoor PCB and display board communication error; If error repeats, call for service;
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit
you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and
the specifications of the product for reasons, such as product improvement, are subject to
change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for
further details. Any future updates to the manual will be uploaded to the service website, and
it is advised to always check for the latest version.
28
Scan here to download the latest version of this manual.
www.inventorappliances.com/manuals
EN