INVENTOR CF-ION-10L User Manual page 21

• When unit is on, press the Timer button to activate the auto STOP function. When
the unit is off, press this button to activate the auto START function.
• Press the (+) or (-) buttons to change the time by 0.5 hour increments, up to 10
hours or by 1 hour increments up to 24 hours. The control panel will then count
down time remaining until START or STOP.
• The time selected will be stored within 5 seconds and the main display will
automatically return to its previous state.
• Turning the unit ON or OFF at any time or changing the timers setting to 0.0 will
terminate the Auto Start/Stop function.
• When the code "P2" appears on the led display, the Auto Start/Stop function will
be terminated.
FAN
Press the FAN button to select among the Low, Med or High fan speed. A light indicator will
illuminate separately for each fan speed selected.
• Low fan speed: When activated the indicator marked "Low" is turned on. Select
the
low fan speed for quite operation in order to enjoy ideal conditions.
• Medium fan speed: When activated the indicator marked "Med" will be turned
on. Select this mode for normal operation.
• High fan speed: When activated the indicator marked "High" is turned on. Select
this mode when immediate dehumidification is necessary, such as areas or rooms
that are unused for an extended period of time.
FRESH
Press the FRESH button
will illuminate to inform that this function has been selected. Ions will be released in the
atmosphere to purify the air and remove unpleasant and unhealthy particles.
EN
The timer function can either be set to ON or OFF. Setting
ON and OFF simultaneously is not possible.
to activate the ionizer of the dehumidifier. A light indicator
21