Lincoln Electric LF 52Ds Operator's Manual page 17

English
Green Mode – is a power management feature that enables
welding equipment to switch to low power state and reduce power
consumption while is not using.
Note: Not apply to Flextec
Display Configuration Settings:

Standby

Shutdown
Standby – this option allows you to reduce energy consumption to
the level below 50W when the welding equipment is unused.
Default value: OFF.
To set the time for Standby option:

Press the Right Control [17] to enter in to Standby menu.

By the Right Control [17] set require time from 10-300min range
or Off this function.

Press the Right Control [17] to confirm.

When machine is under Standby mode any action on user
interface or trigger activates normal work of welding machine.
Shutdown – this option allows you to reduce energy consumption to
the level below 10W when the welding equipment is unused.

Default value: OFF.
To set the time when Shutdown option will be turn on:

Press the Right Control [17] to enter in to Shutdown menu

By the Right Control [17] set require time from 10-300min range
or Off this function.

Press the Right Control [17] to confirm.

Operating system inform you 15s before activate Shutdown
Mode by time counter.
Note: When machine is under Shutdown mode it is required to
switch the machine off and on to activate normal operation.
Note: Under Standby and Shutdown displays are disabled.
Advanced Menu – Device Configuration Menu.
Note: To access to advanced menu:

In Base Menu select the Advanced Menu (Adv).

Use the Right Button [19] to confirm the selection.
15
® 350x i Flextec ® 500x.
English