Lincoln Electric LF 52Ds Operator's Manual page 10

15. LED Indicator: Informs that the value on the right
display is in volts unit and during welding, it blinks and
the display shows the measured voltage.
16. LED Indicator: Informs that the value on the right
display is Trim. Trim is adjustable from 0.50 to 1.50.
1.00 is the nominal setting.
17. Right Control: Adjusts values on the right display.
18. LED Indicator: Quick Access Menu.
19. Right Button: Enables selecting, changing and setting
welding parameters. Quick Access Menu.
20. LED Indicator: Indicates that the Settings and
Configuration Menu is activated.
21. Left Button: Enables:

Checking the active program number. To check
the program number, press the left button once.

Changing the Welding Process.
22. Welding Programs Indicators (changeable): In the
user memory can be stored four user programs. Shine
LED indicates that the program is active.
23. Welding Programs Indicators (unchangeable): LED
indicates the program for non-synergic process is
active. See the Table 2.
24. Left Control: Adjusts values on the left display.
25. LED Indicator: Informs that the value on the left
display is in ampere units, blinks during welding and
the display shows current measured.
26. LED Indicator: Informs that the wire feed speed is on
the left display.
English 8 English