Lincoln Electric LF 52Ds Operator's Manual page 15

Setting and Configuration Menu
To access the menu, press the Left [21] and the Right [19]
Buttons simultaneously.
Parameter Selection Mode – the Parameter Name on the
Left Display [11] blinking.
Parameter Change Value Mode – the parameter value on
the Right Display [14] blinking.
Table 5 Interface Components and functions when the Settings and Configuration Menu is active.
24
Figure 8
English
11 14
21 20 19
Figure 7
To exit the menu with changes saved, press the Left [21]
and the Right [19] Buttons simultaneously.
After one minute of inactivity the Menu without saving will
also exit.
Functions of Interface Components
11. Parameter Name.
14. Parameter Value.
17. Changing Parameter Value.
19. Entering to parameter edition. Confirm
Parameter Value change.
20. Setting and Device Configuration Menu is
active.
21. Cancelation / Exit.
17 24. Parameter Selection.
User has access to two menu levels:

Basic Level – basic menu which is connected with
settings of Welding Parameters.

Advanced Level – advanced menu, configure device
menu.
Note: The availability parameters in the Setting and
Configuration Menu depend on the selected welding
program / welding process.
Note: After the device has been restarted remembers the
last selected welding program with its parameters.
13
WARNING
English