Lincoln Electric LF 52Ds Operator's Manual page 11

Table of Contents

Changing the Welding Process or Program

Table 2 . Unchangeable Welding Programs

Symbol

Note: The list of available programs depends on the power source. If the power source does not support one of four

unchangeable programs, the LED indicating this program does not light up.

It is possible to quick recall one of the eight welding

programs. Four programs are fixed and cannot be

changed - Table 2. Four programs can be changed and

assigned to one of four user memory. By default, user

memories store the first available welding program.

To change the welding process:



Press the Left Button [21]. "Pr" is shown on the Left

Display [11] and the actual program number on the

Right Display [14].



Again, press the Left Button [21] the welding programs

indicator (22 or 23) will pass to the next program in the

sequence shown in Figure 5.

Figure 5



Press the Left Button [21] until the LED Indicator (22

or 23) will indicate desired welding program.

Note: After the device has been restarted remembers the

last selected welding program with its parameters.

English

Process

GMAW (non-synergic)

FCAW-GS

SMAW

GTAW

Program Number

Powertec

Speedtec

Flextec

English

Table of Contents

K14186-2