Wlan Module - HP ProBook x360 11 G2 Education Edition Manual

WLAN module

Description
Intel Dual Band Wireless AC 7265 802.11 AC 2×2 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro)
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the WLAN module:
1. Disconnect the wireless antenna cables (1) from the terminals on the WLAN module.
NOTE:
The wireless antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the computer.
(The WLAN module tilts up.)
Battery on page
The wireless antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal.
Keyboard/top cover on page
29).
Spare part number
860883-001
20).
Component replacement procedures
HP Confidential
31