Upnp - D-Link DWR-953 User Manual

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual

UPnP

On the Advanced / UPnP page, you can enable the UPnP function. The UPnP function allows to
automatically create port forwarding rules for applications in the router's LAN requiring a
connection from an external network.
By default, the UPnP function is enabled. You can also manually add port forwarding rules for
network applications on the Firewall / Virtual Servers page. From the Type drop-down list,
select the WAN connection type through which the function will operate.
IPv4: When this value is selected, port forwarding rules will operate only through the IPv4
•
connection.
Dual: When this value is selected, port forwarding rules will operate through IPv4 and IPv6
•
connections.
!
Port forwarding rules will be automatically created only in case the router's default WAN
connection uses a public IP address.
When the function is enabled, the following parameters of the router are displayed on the page:
Parameter
Protocol
IP address
Figure 157. The Advanced / UPnP page.
IPv4 / IPv6
A protocol for network packet transmission.
The IP address of a client from the local area network.
Page 201 of 264
Configuring via Web-based Interface
Description