D-Link DWR-953 User Manual page 108

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
Parameter
Force
After specifying the needed parameters, click the SAVE button.
To edit the parameters of an option, left-click the relevant line in the table. In the opened window,
change the needed parameters and click the SAVE button.
To remove the value of an option, select the checkbox located to the left of the relevant line in the
table and click the DELETE button (
In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the Dynamic IP Addresses section, the DHCP value is selected from the Mode of
IPv4 address assignment drop-down list).
Figure 95. Configuring the local interface. The IPv4 tab. The section for creating MAC-IPv4 pairs.
To create a MAC-IPv4 pair, click the ADD button (
address field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the IP address field, enter an IPv4 address which will be assigned to the device with the
specified MAC address. In the Hostname field, specify a network name of the device for easier
identification. To limit the time of the specified IPv4 address assignment, specify the required value
in the Lease time field. Click the SAVE button.
To edit the settings for an existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the SAVE button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
Move the switch to the right to let the DHCP server send the
selected option regardless of the client's request.
Move the switch to the left to let the DHCP server send the selected
option only when the client requests it.
). Then click the APPLY button.
). Then click the APPLY button.
Page 108 of 264
Configuring via Web-based Interface
Description
). In the opened window, fill in the MAC