D-Link DWR-953 User Manual page 82

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
Parameter
IPv6 address
Prefix
Gateway IPv6 address
Primary IPv6 DNS
server / Secondary IPv6
DNS server
Get IPv6
Enable prefix
delegation
Obtain DNS server
addresses
automatically
Primary IPv6 DNS
server / Secondary IPv6
DNS server
When all needed settings are configured, click the APPLY button.
IPv6
For Static IPv6 type
Enter an IPv6 address for this WAN connection.
The length of the subnet prefix. The value 64 is used usually.
Enter an IPv6 address of the gateway used by this WAN
connection.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
From the drop-down list, select the mode of a prefix request from a
delegating DHCPv6 server to configure a range of IPv6 addresses
for the local network.
None: The mode without prefix request.
•
Auto: The mode with the ability to request a prefix. When
•
this value is selected, the router requests a prefix from a
DHCPv6 server. Upon that obtaining a prefix is not
mandatory to establish the connection.
Force: The mode with forced prefix request. When this
•
value is selected, the router requests a prefix from a
DHCPv6 server. Upon that obtaining a prefix is mandatory
to establish the connection.
Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
server and Secondary IPv6 DNS server fields are not available
for editing.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Page 82 of 264
Configuring via Web-based Interface
Description