D-Link DWR-953 User Manual page 134

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
Parameter
Enable authentication
Multiple sessions
CHAP
MSCHAP
MSCHAPv2
PAP
Enable MPPE
MPPE40
MPPE128
Authentication
Move the switch to the right to enable authentication. Upon that the
Multiple sessions, CHAP, MSCHAP, MSCHAPv2, and PAP
lists are displayed on the page.
The mode of connection for the users listed in the Users List
section. Select a value from the drop-down list.
Allow: Several users with the same user account are allowed
•
to connect.
Only new connections: If there are several users with the
•
same user account, only new users are allowed to connect.
Only old connections: If there are several users with the
•
same user account, new users are not allowed to connect.
Challenge Handshake Authentication Protocol.
Microsoft Challenge Handshake Authentication Protocol.
Password Authentication Protocol.
Select the needed action from the drop-down list for the relevant
protocol.
Auto: Enable automatic client authentication over this
•
protocol.
Refuse: Disable client authentication over this protocol.
•
Require: Require client authentication over this protocol.
•
MPPE
Move the switch to the right to enable MPPE encryption.
MPPE encryption can be applied only if the Require value is
selected from the MSCHAP or MSCHAPv2 drop-down list.
MPPE encryption with a 40-bit or 128-bit key is applied. Select the
needed action from the drop-down list.
Auto: Allow clients to connect to the VPN server
•
automatically with MPPE encryption.
Refuse: Restrict clients from connecting to the VPN server
•
with MPPE encryption.
Require: Allow clients to connect to the VPN server only
•
with MPPE encryption.
Page 134 of 264
Configuring via Web-based Interface
Description