Upnp - D-Link DSL-1501G User Manual

If you wish to use NTP to set system time and date following these steps:
1. Make sure NTP enabled is displayed in the NTP State drop-down menu.
2. Type in an NTP server IP address that can be used by the Router. Keep in mind that many NTP servers
require permission before they may be used.
3. Select the Time Zone where the Router is located or the time zone you want to use for system time.
Time zones are displayed as GMT (Greenwich Mean Time) plus or minus hours incremented by whole
hours.
4. Click the Set Time button to set the time with the chosen NTP server. This will send a request to update
system time and date. NTP update packets are sent periodically to ensure precision.
If you prefer to use to use the timer located in the computer you are using to configure the Router:
1. Select Set time with local PC time in the NTP State drop-down menu.
2. Click the Set Time button to set the time with your computer.

UPnP

Universal Plug and Play (UPnP) is a feature that facilitates networking for a variety of devices and systems.
UPnP allows enabled systems to be networked more easily. This feature is enabled by default. You can disable it
in the UPnP Configuration menu by selecting disabled and clicking the OK button.
DSL-1500G SHDSL Ethernet Router User's Guide
UPnP Configuration
29