D-Link DWR-953 User Manual page 101

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
Parameter
Select band
automatically
APN
Without authorization
Authentication protocol Select a required authentication method from the drop-down list.
Username
Password
Type
Figure 88. The page for creating a new Mobile Internet connection. The IPv4 section.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
If the switch is moved to the right, the frequency band configuration
is performed automatically.
If you need to configure the frequency band manually, move the
switch to the left. Upon that available bands for the type of network
selected from the Mode list are displayed on the page. To disable
the needed bands, move relevant switches to the left. Contact your
operator to clarify the information on used bands.
The switch is displayed after assigning the connection to the
connected SIM card.
An access point name.
Move the switch to the right if your operator does not require
authorization.
A username (login) to connect to the network of the operator.
A password to connect to the network of the operator.
Show icon ( ) to display the entered password.
An IP version which will be used by this connection. Select the
IPv4, IPv6, or Dual value from the drop-down list.
IPv4 (for the Dual and IPv4 types)
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 101 of 264
Configuring via Web-based Interface
Description
Description
Click the