D-Link DWR-953 User Manual page 222

DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
To specify URL addresses to which the selected filtering mode will be applied, in the Addresses
section, click the ADD button (
parameters:
Parameter
URL address
Match with template
Click the SAVE button.
To remove a URL address from the list, select the checkbox located to the left of the relevant
address in the table and click the DELETE button (
editing window.
To define devices to which the specified restrictions will be applied, select a needed value from the
Client filtering drop-down list.
Devices from list: When this value is selected, the router applies restrictions only to the
•
devices specified in the Clients section;
All but devices from list: When this value is selected, the router does not apply
•
restrictions to the devices specified in the Clients section, but applies restrictions to other
devices.
To add a client to the list, in the Clients section, click the ADD button (
window, in the MAC address field, enter the MAC address of the device from the LAN. You can
enter the MAC address of a device connected to the router's LAN at the moment. To do this, select
the relevant device from the drop-down list (the field will be filled in automatically) and click the
SAVE button.
To remove a client from the list, select the checkbox located to the left of the relevant rule of the
table and click the DELETE button (
After completing configuration of the URL filter, click the APPLY button.
). In the opened window, you can specify the following
A URL address, a part of URL address, or a keyword.
Select a value from the drop-down list.
Full: The request address should exactly match the value
•
specified in the field above.
Begin: The request address should begin with the value
•
specified in the field above.
End: The request address should end with the value
•
specified in the field above.
Partly: The request address should contain the value
•
specified in the field above in any part of it.
). Also you can remove a client in the editing window.
Page 222 of 264
Configuring via Web-based Interface
Description
). Also you can remove an address in the
). In the opened