Leica Q3 Instruction Manual page 245

No images are displayed
Images cannot be displayed
Video quality
Video recordings show flickering/stripes
Camera noise in video recording
No sound on video recording
Flickering or horizontal stripes in the video
recording
Smartphones/WLAN
WLAN connection gets interrupted
Cannot pair with a mobile device
Mobile device connection/image transfer not
working
Camera does not appear on the WLAN
configuration screen of the mobile device
No memory card inserted
The photos were taken with another camera
File name was changed on a PC
Light source interference in artificial lighting
The setting wheels were used
Playback volume is set too low
Microphone was covered during shooting
Speakers are covered
Microphone was deactivated while recording
CMOS sensors will display this phenomenon when light
sources like LED lamps or fluorescent tubes are used
Camera deactivates when it overheats (safety feature)
The camera was already paired with the mobile device
The mobile device is too far away
Interference from other devices in the vicinity, e.g. other
smartphones or a microwave oven
Interference from multiple mobile devices in the vicinity
Mobile device is currently connected to another device
Mobile device does not recognize camera
Insert a memory card
Transfer the files to another device to view them
Use suitable software for file transfers from a PC to the
camera
Select a different frame rate (suitable for the local
alternating current (AC) grid frequency) under
Format / Resolution
Avoid using the setting wheels during video shootings
Increase playback volume
Make sure the microphone is not obstructed while
shooting video
Make sure that speakers are unobstructed during playback
Activate the microphone
Quality may be improved by selecting a manual shutter
speed (e.g. 1/100 s)
Allow camera to cool down
Delete the camera registration from the Bluetooth settings
in the mobile device and repeat pairing process
Bring the devices closer to each other
Increase distance to interfering devices
Re-establish the connection/disconnect other mobile
devices
Check connection
Switch the WLAN function of the mobile device off and on
again
Video
245
FAQ