Leica Q3 Instruction Manual page 244

Images are damaged or missing
The most recent image is not displayed on the
LCD panel
Parts of my video scenes are not fully in the
picture
Image quality
The image is too bright
Image noise
Unnatural colors
Round white stains, similar to soap bubbles
Images are out of focus
Images are overexposed
Out of focus/picture stabilizer not functioning
The image is grainy or there is image noise
Horizontal stripes
Unnatural colors and brightness
244
FAQ
The memory card was removed while the readiness
indicator was flashing
The memory card formatting is faulty or the card is
damaged
Preview is deactivated
Difference of aspect ratios between camera and playback
medium
Light sensor was covered during shooting
Long exposure times (> 1 s)
ISO sensitivity set too high
White balance not or incorrectly set
Flash photography in a very dark environment: reflections
of dust particles
Lens is dirty
Lens is obstructed
Camera moved during shooting
Macro Function
Flash is activated in bright surroundings
Strong light source in the image
(Half) backlight falling into the lens (also from light sources
outside the image range)
Selected exposure time is too long
Shooting at a dark location without flash
ISO sensitivity set too high
Picture was taken with electronic shutter under a light
source like a fluorescent lamp
Shooting in artificial light or extreme brightness
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
Reformat the memory card
(Caution: Loss of data!)
Activate
Auto Review
Set the correct aspect ratio on the camera
Make sure that the light sensor is not obstructed
Activate the noise reduction function for long-term
exposure
Decrease ISO sensitivity
Adjust white balance to light source or adjust manually
Deactivate the flash
Clean the lens
Make sure that lens is unobstructed
Use flash
Mount the camera on a tripod
Use faster shutter speeds
Select the appropriate mode
Change the flash mode
Avoid strong light sources in the image
Use the lens hood or change to another object
Select a shorter exposure time
Use a tripod
Decrease ISO sensitivity
Try shorter shutter speeds
Set white balance or select correct lighting presets