Macro Function - Leica Q3 Instruction Manual

ACCESS VIA THE FUNCTION BUTTON
You can access the enlargement function independent of focusing
for a better assessment of the settings.
The function must be assigned to one of the function
Magnification
buttons to use this feature (see p. 59).
Assigning a function to a function button
▸ See p. 59
Accessing the enlargement function
▸ Press the function button
• An enlarged image section appears. The position of the enlarge-
ment depends on the position of the AF frame.
• The rectangle within the frame at the top right represents the
current magnification, as well as its position in the displayed
cropped section.
Adjusting the enlargement function
▸ Press the center button
• The image section toggles between magnification factors.
Changing the position of the enlarged section
▸ Move the position of an enlarged cropped section by swiping
or
▸ Press the directional pad in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Note
• The enlargement function remains active until it is exited.
102
PHOTOGRAPHY ▸ FOCUSING

MACRO FUNCTION

The working range for the focus setting can be switched quickly and
easily from the standard focus range (30 cm to infinity) to the macro
range (17 cm to 30 cm) using the macro ring. AF and MF mode are
available in both ranges.
▸ Turn the macro ring until the alignment point is set to
• The distance scales on the focus ring change when the focus
ranges change.
MACRO