Performance Mode; Eco Mode; Airplane Mode; Executing A Firmware Update - Leica Q3 Instruction Manual

PERFORMANCE MODE

Bluetooth is permanently activated, allowing anytime Geotagging
(where enabled). Wi-Fi is similarly permanently activated. This
option offers the fastest access to Leica FOTOS and therefore an
excellent user experience.
▸ Select in the main menu
Leica FOTOS
▸ Select
Connectivity
▸ Select
Performance mode

ECO MODE

Bluetooth is permanently activated, allowing anytime Geotagging
(where enabled). Camera Wi-Fi will be enabled only during the
transfer of settings or files, and will otherwise remain off. This is a
power saving option.
▸ Select in the main menu
Leica FOTOS
▸ Select
Connectivity
▸ Select
Eco mode

AIRPLANE MODE (

)
Off
All RF connections will be deactivated if this option is selected
▸ Select in the main menu
Leica FOTOS
▸ Select
Connectivity
▸ Select
Off

EXECUTING A FIRMWARE UPDATE

Any interruption of a running firmware update may cause serious
and irreparable damage to your equipment!
You will therefore have to take particular note of the following,
when carrying out a firmware update:
• Do not switch off the camera!
• Do not remove the memory card!
• Do not remove the rechargeable battery!
• Do not detach the lens!
Leica FOTOS will notify you when firmware updates are available for
your Leica cameras.
▸ Follow the instructions provided by the Leica FOTOS app
Notes
• A warning message will appear if the battery is insufficiently
charged. Recharge the battery and then repeat the process de-
scribed above.
• Alternatively, firmware updates can also be installed via the camera
menu (see p. 225).
LEICA FOTOS ▸ EXECUTING A FIRMWARE UPDATE
235