Macro Function; Iso Sensitivity; Fixed Iso Values - Leica Q3 Instruction Manual

MACRO FUNCTION

The working range for the focus setting can be switched quickly and
easily from the standard focus range (30 cm to infinity) to the macro
range (17 cm to 30 cm) using the macro ring. AF and MF mode are
available in both ranges.
▸ Turn the macro ring until the alignment point is set to
• The distance scales on the focus ring change when the focus
ranges change.
194
RECORDING VIDEO ▸ ISO SENSITIVITY

ISO SENSITIVITY

The ISO setting covers a range between ISO 50 and ISO 100 000,
allowing you to adapt to the relevant situation as required.
There is more leeway for the use of preferred shutter-speed/ap-
erture combinations when choosing an automatic ISO setting. You
can set priorities within the scope of the automatic setting.
Factory setting:

FIXED ISO VALUES

Values between ISO 50 and ISO 100 000 can be selected in 14
increments. Manual ISO settings are initially done in full EV steps,
and from ISO 50,000 in 1/3 EV steps.
▸ Select
ISO
▸ Select the desired value
Note
MACRO
• When high ISO values are used or the image is edited later, image
noise, as well as vertical and horizontal stripes may become visi-
ble, particularly in larger, evenly lit areas of the object.
Auto ISO
in the main menu