Using Lut Profiles; Lut Profile - Leica Q3 Instruction Manual

USING LUT PROFILES

CHANGING THE OUTPUT CHANNEL
The user can choose to apply the LUT profile for output via HDMI or
in the camera (LCD panel/EVF).
▸ Select in the main menu
Video Settings
▸ Select
Video Gamma
▸ Select
Settings
▸ Select
L-Log
▸ Select
Output
▸ Select the desired setting
( , )
EVF-LCD HDMI
Note
• The menu item is unavailable if the setting
Output
for .

LUT Profile

166
VIDEO SETTINGS ▸ VIDEO GAMMA
When toggling between the two output channels, the setting for the
selected memory slot will remain unchanged. Since it is possible
that different profiles are saved on the same slot depending on the
output channel, it is possible that a different profile or an unused
memory slot is selected. The name of the active profile will change
accordingly next to the menu item
for the pre-configured profiles, which exist on the same memory
slot for both output channels.
is selected
Off
LUT Profile
Active output channel
EVF-LCD
. This does not apply
HDMI