UPDATING THE CAMERA FIRMWARE
▸
Preparation
▸
Select
Camera Information
▸
Select
Firmware
▸
Select
Start Update
• A prompt with information about the camera is displayed.
▸
Check the version information
▸
Select
Yes
• The prompt
Save profiles on SD Card?
▸
Select
/
Yes
No
• The update will start automatically.
• The status LED will flash during this process.
• Once the process has completed successfully, a relevant on-
screen message and prompt to restart the device will appear
on screen.
▸
Switch the camera off and on again
Note
• Date & time, as well as the preferred language will have to be
set up again after the restart. Relevant prompts will appear on
screen.
• These settings will be applied automatically if the update is loaded
via Leica FOTOS.
in the main menu
appears.
OTHER FUNCTIONS ▸ FIRMWARE UPDATES
227