DIRECT ACCESS IN PLAYBACK MODE
The function buttons can have individual assignments in playback
mode as well.
In factory settings, the function buttons have the following assign-
ments:
Button
Function
FN button
13
Delete Single
FN button
14
Mark shots (
The descriptions in the next few sections presume factory settings.
Note
• The assigned function is independent of the current display
mode; the delete functions overview can therefore be accessed
directly in full screen display mode.
• The assigned function is unavailable if the function button
addresses an on-screen control element (e.g. in the "Delete"
screen).
)
Rate / Unrate
PLAYBACK MODE ▸ CONTROL ELEMENTS IN PLAYBACK MODE
CONTROL ELEMENTS ON THE LCD PANEL
On-screen control elements generally function by intuitively by
touch. Many can also be selected by pressing one of the three but-
tons to the right of the LCD panel. A control element in the header
is accompanied by an icon denoting the relevant button. A control
element on the edge of the screen will be positioned directly next
to the relevant button.
Example: The "Go back" icon
– tap on the "Go Back" icon directly
– press the relevant button
(top button =
button)
PLAY
C B
A C
A
Control element "Go back"
B
Control element "Delete"
C
Display of the relevant button
can be selected in one of two ways:
A
B
209