Direct Access To Menu Functions; Dynamic Direct Access - Leica Q2 MONOCHROM Instruction Manual

DIRECT ACCESS TO MENU FUNCTIONS

You can assign specific menu functions to the following operating
elements for extra quick direct access to menu items in recording
mode. The available functions are shown in the list on p. 150.
15
Zoom/Lock button
13 5
15 button 4
FN
Notes
• The submenus accessed via direct access may look differently
than when they are accessed via the main menu. Specifically,
they often appear as menu bars to allow quick settings.
• The settings can be done via key control or using touch control
on the LCD panel. The operating mode depends on the type of
submenu.
5
13
4
Thumbwheel button
Thumbwheel

DYNAMIC DIRECT ACCESS

The two following buttons additionally allow a quick assignment of
menu functions from a custom list of items.
– button (factory setting:
FN
Self Timer Self Timer
– Thumbwheel button (factory setting:
CREATING THE CUSTOM LIST
▸ Select in the main menu
Customize Control Customize Control
▸ Select /
FN button FN button Right Wheel Button Right Wheel Button
▸ Select or for each menu item
On On Off Off
• You can activate a maximum of 8 menu items for this list.
CHANGING AN ASSIGNMENT
▸ Press and hold the button / thumbwheel button
FN
• The direct access list you have created will appear on the LCD
panel.
• This list can be modified at any time via the menu item
.
Customize Control Customize Control
▸ Select the menu item you want by pressing the center button
• You will not be prompted to acknowledge your selection. The
change is applied immediately.
ACCESSING THE ASSIGNED MENU FUNCTION
▸ Press the button/thumbwheel button briefly
FN
• The assigned function is accessed, or a submenu appears on
screen.
)
)
ISO ISO
EN
51