Table of Contents
Advertisement
UNLOADING
1.
Park the Wide Body on level ground whenever possible during unloading.
2.
With the operator in the truck or tractor seat, and all others well clear of the Wide Body, engage
the hydraulics.
3.
The gate delay will automatically activate.
4.
During unloading, move the truck forward to allow the material to fall away from the rear of box.
5.
When the Wide Body is empty, disengage the hydraulics.
6.
Engage the switch for the barn doors to close them. (if applicable)
7.
Check the rear door to make sure it is securely latched.
TOP PIVOT DOOR/REAR DOOR LATCHES/GATE DELAY
Located at the bottom left, center, and right-hand
side of the rear door are the door latches. The
latches lock into the apron chain to hold the door
closed when loading. When the hydraulics for
the main apron chain are activated, the latches
automatically flip to open with the movement of
the apron chains. The rear door is held open by
two hydraulic cylinders. This system allows for
a total cleanout of the box. Upon completion of
unloading & switching off the apron chain, the
rear door will close.
OPERATION
-16-
Door Latches
Advertisement
Table of Contents
