Page 1
8200 SERIES 8200 SERIES WIDE BODY WIDE BODY FORAGE BOX FORAGE BOX WARNING WARNING READ AND UNDERSTAND THIS MANUAL BEFORE READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS EQUIPMENT. UNSAFE OPERATION OPERATING THIS EQUIPMENT. UNSAFE OPERATION OR MAINTENANCE OF THIS EQUIPMENT CAN RESULT OR MAINTENANCE OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY OR DEATH.
H&S WARRANTY H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in material and workmanship. Except as noted below, this warranty term is twelve (12) months on parts and labor, and twenty-four (24) months on parts only from the date of delivery of the product to the original purchaser by an authorized H&S dealer.
MANUFACTURER’S STATEMENT Congratulations on your selection of an H&S product. Your new H&S product has been manufactured of the finest quality materials and components. The performance you receive from your machine is largely dependent upon how well you read, understand this manual, and apply this knowledge. There is a right and a wrong way to do everything.
Page 5
WARRANTY REGISTRATION • Date of Purchase: __________________________ • Purchaser Name: ________________________________________________ • Street Address: _________________________________________________ • City: __________________________________________________________ • State: __________________________________ Zip: ____________________ • Phone Number: _________________________________________________ • E-mail Address: _________________________________________________ • Product: _______________________________________________________ • Model Number: _________________________________________________ • Serial Number: __________________________________________________ •...
DEALER PRE-DELIVERY CHECKLIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS After the Wide Body has been completely set up, check to be certain it is in correct operating order before delivering to the customer. The following is a list of points to inspect. Check off each item as you have made the proper adjustments and found the item operating satisfactorily.
DEALER DELIVERY CHECKLIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS This checklist that follows is an important reminder of valuable information that should be passed on to the customer at the time this Wide Body is delivered. Check off each item as you explain it to the customer. This delivery checklist, when properly filled out and signed, assures the customer that the pre- delivery service was satisfactorily performed.
SAFETY INFORMATION YOUR SAFETY ALERT! IS INVOLVED. THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER YOUR PERSONAL SAFETY IS INVOLVED. TAKE TIME TO BE CAREFUL. REMEMBER: THE CAREFUL OPERATOR IS THE BEST OPERATOR. MOST ACCIDENTS ARE CAUSED BY HUMAN ERROR. CERTAIN PRECAUTIONS MUST BE OBSERVED TO PREVENT THE POSSIBILITY OF INJURY OR DAMAGE.
SAFETY INFORMATION Keep signs in good condition. Immediately replace any missing or damaged signs. RECOGNIZE SAFETY INFORMATION This is the safety alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury.
SAFETY INFORMATION W A R N I N G TO PREVENT SERIOUS INJURY OR DEATH BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE SAFETY PRECAUTIONS.
SET-UP & ASSEMBLY Note: Determine right and left side of the e Body by viewing it from the rear. If instructions or parts lists call for bolts, refer to Cap Screw Torque Values page to identify. 1. Check the Wide Body for proper assembly and adjustment. 2.
PREPARING FOR OPERATION PREPARING THE WIDE BODY Properly lubricate the Wide Body by refering to the Lubrication Chapter of this manual for locations. Four main apron adjustment bolts with tension springs are located on the idler shaft at the front of the box.
OPERATION UNLOADING Park the Wide Body on level ground whenever possible during unloading. With the operator in the truck or tractor seat, and all others well clear of the Wide Body, engage the hydraulics. The gate delay will automatically activate. During unloading, move the truck forward to allow the material to fall away from the rear of box.
Page 19
OPERATION BARN DOORS Barn doors are optional on the Wide Body. Latches for the doors are located at the bottom center of the rear doors. These latches lock in the main apron chain of the rear drive shaft to hold doors closed when loading.
ADJUSTMENTS MAIN APRON ADJUSTMENT The four main apron adjustment bolts help maintain proper tension on the apron chains. Tighten the full threaded bolts to adjust aprons. Aprons are properly adjusted when two cross slats, or about three feet of chain lift off the chain return slides from the front of the box.
OPTIONAL EQUIPMENT • Electric Actuator - for Front Flip-Down • Roof Hood - Helps keep forage from blowing out of the opposing side of the box • Chassis & Truck Mount Scale System • The end-to-end arm tarp system is ideal for forage and is a fast and easy system to use. -19-...
LUBRICATION GUIDE Become familiar with all lubrication points and establish a systematic routine to ensure complete and quick lubrication of the machine. GENERAL INFORMATION IMPORTANT: Catch and dispose of fluid per local waste disposal regulations whenever service is performed on hydraulic components, valves, cylinders, hoses, etc. Grease Zerks Grease daily during normal use and before and after storage and after power washing.
DECAL LOCATION Your H&S Wide Body was manufactured with operator safety in mind. Located on the Wide Body are various decals to aid in operation and warn of caution areas. Pay close attention to all decals. DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED, OR IF THE Wide Body IS REPAINTED, REPLACE DECALS.
TROUBLESHOOTING WARNING: MAKE SURE THE TRUCK/TRACTOR IS SHUT OFF AND THE TRUCK/TRAILER CANNOT MOVE BEFORE SERVICING. MAINTENANCE AND REPAIR SERVICE WORK MUST BE PERFORMED BY A QUALIFIED SERVICE PERSON ONLY. TROUBLE CAUSE REMEDY Load will not move Truck PTO not engaged Engage truck PTO Tractor Hydraulics not engaged Engage tractor Hydraulics...
Page 30
H&S MFG. CO. products approved for the FEMA SEAL OF QUALITY Manufactured By: H&S MANUFACTURING CO., INC. 2608 S. HUME AVE. MARSHFIELD, WI 54449 (715) 387-3414 | hsmfgco.com...