380w led, tunable white 100/260v, dmx512 (22 pages)
Summary of Contents for LDR Arpa F150 W RDM, LED
Page 1
Bedienungsanleitung instrucciones de manejo mode d'emploi gebruiksaanwijzing Arpa F150 W RDM, LED 01151000 Arpa F150 C RDM, LED 01151100 01152000 Arpa PC150 W RDM, LED 01152100 Arpa PC150 C RDM, LED DMX512+RDM Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo mn Italy. tel +39 0376 771 777 ‐ fax +39 0376 772 140 ‐ email info@ldr.it...
Use of a phase control dimmed mains supply may damage the internal electronics This product features fan‐assisted ventilation. Make sure you do not cover the fans or obstruct the air flow at any one time. Make sure the fans are working correctly. Should you detect even the slightest malfunction, switch the luminaire off and carry out the necessary servicing. Replace the fan if necessary. Repairing and replacement of any component of this product must be carried out exclusively by professional personnel in conformity with the relevant safety and health standards and only with original Luci della Ribalta srl components. 2 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
Page 4
Installation of this product must be exclusively carried out by professional personnel in compliance with the safety norms in force in the country where the product is used. This product must be fitted with a secondary fixing system such as a safety chain or bond. Should this not be supplied as a standard accessory, please make sure you buy it separately and install it before using the product. WARNING: DANGER OF ELECTRICAL SHOCK DO NOT OPERATE ON LIVE EQUIPMENT Disconnect power before opening this fixture to access its light source or electronics. The replacement of the LED source or any of its electronic components can be carried out exclusively by professional personnel upon LDR’s written authorization and only with original Luci della Ribalta srl components. Failure to obtain the manufacturer’s authorization to carry out the replacement/repair, will immediately invalidate the product’s warranty WARNING: EYE DAMAGE HAZARD Make sure this fixture is installed so as to avoid prolonged direct staring at its operating light source (LED) from a distance of less than 7m / 23ft. WARNING: FIRE HAZARD Never locate this fixture on any flammable surface. Minimum distance of any part of the body of the luminaire from any flammable surface or object: 0,5m ...
net weight: 10,1 kg gross weight: 11,9 kg gross weight: 12,3 kg packing dimensions: 60x40x45h cm packing dimensions: 60x40x45h cm IMPORTANT NOTICE BEFORE THE INSTALLATION / INSTALLATION Before installing this fixture check its weight on the product label and the weight of each accessory you are adding and make sure the structure you are installing it to withstands the total weight. The mounting stirrup rotates around the body of the luminaire and is designed to allow the spotlight to be suspended from above using a C‐clamp or similar, or supported on a stand or bracket from below. CAUTION DO NOT TURN THE LUMINAIRE UPSIDE‐DOWN BUT ALWAYS TURN THE STIRRUP IF YOU NEED TO MOUNT IT ON A STAND OR BRACKET Note: the spotlight’s location must provide suitable ventilation for the LED module. If not supplied choose a suitable clamp and make sure it is correctly fixed and strongly tightened to the stirrup according to the clamp’s manufacturer’s instructions If not supplied choose a suitable safety cable or bond. Clamp it to the eyelet provided on the upper rear part of the luminaire (see picture here below), run it twice around the stirrup and the structure the luminaire is hung to so as to bond them together and close the loop. 4 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
The green or green and yellow wire must be connected to the connection point marked with the letter E or with the symbol or coloured in green or in green‐yellow The blue wire must be connected to the connection point marked with the letter N or with the symbol or coloured in black The brown wire must be connected to the connection point marked with the letter L or with the symbol or coloured in red 5 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
Connect the unit to a continuous mains power source Make sure the power supply is protected by a suitable thermal magnetic circuit breaker This fixture must be grounded 10. LOCAL CONTROL PANEL AND OPERATION OPERATION: LCD display for DMX address, system setup and status details. POWER: power LED status indicator, red color. ON= power DMX: DMX LED status indicator, green color. LED OFF = DMX OFF and manual control activated, LED ON = DMX MODE activated with no DMX signal, FLASHING LED = receiving DMX MENU: rotary switch selector to select and modify the operational modes. Turn left or right to navigate through the menu and press to select or to confirm DMX IN: input DMX signal (pin1=0, pin2= DATA‐, pin3=DATA+). DMX OUT: Loop through DMX signal output POWER IN: Mains power input POWER OUT: Mains power output 11. MENU There are fourteen different menus to control the settings of the ARPA LED. The rotary selector is used to adjust the settings and to navigate through the menu. Turn left or right to select the menu and push to access or to confirm the selected data or functions. To exit the selected menus without saving the data, press the rotary selector for at least 1 second. 11.1 DMX OR MANUAL (Mode) Select the LED control mode between DMX (factory setting) and manual. To change the control mode press once the rotary selector until an arrow () appears on the menu. Turn the selector to the right or the left to select the desired mode of operation and press to confirm your selection. 6 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
4 DMXMem DIM THE LED TO 80% OF ITS MAXIMUM POWER OFF=80% 4 DMXMem DIM THE LED TO 0% OFF=00% 11.5 STROBE (Strobe) This function enables to activate the strobe function. Factory setting is DISABLE. PRESS TO ACTIVATE Strobe Strobe Strobe TURN TO ENABLE OR THE MENU, AN DISABLE STROBE AND DISABLE ENABLE DISABLE ARROW SHOULD PRESS TO CONFIRM APPEAR 7 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
##°C ARROW SHOULD ##°C ###°F CONFIRM APPEAR 11.13 SOFTWARE VERSION (SwVer) This function allows to visualize the software version. 11.14 PRO or BASIC CONTROL (ProBasic) The PRO‐BASIC control is a special function which allows to limit the access to the control menu. Select ProBasic with the rotary switch and press to access the menu. Select: PRO, to enable access to all the functions BASIC, to limit access to functions 11.1 DMX or MANUAL MODE, 11.2 DMX ADDRESS, 11.12 Temperature Control and 11.13 Software version. Factory setting is PRO. PRESS TO ACTIVATE Choose MenuType MenuType TURN TO SELECT PRO THE MENU, AN OR BASIC MENU AND BASIC ProBasic ARROW SHOULD PRESS TO CONFIRM APPEAR 9 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
THE MENU, AN THE CALIBRATION Set Min ARROW SHOULD VALUE AND PRESS TO #### #### APPEAR CONFIRM 11.18 EXIT HIDDEN MENU (Exit) It allows to exit from hidden menus. 12. CLEANING AND MAINTENANCE To ensure maximum performance of the product, a regular maintenance service should be carried out. Please make sure the product is cold and disconnected from power supply when doing this. General maintenance * Clean all reflective parts such as lenses opening the product, if necessary. * Check the lenses and replace any visibly damaged component. * Clean air ducts and fans in order to allow proper ventilation activity on the product. * Check internal and external wiring and replace any cable which should be damaged by heat or mechanical agents. 13. SPARE PARTS All components are available as spare parts. We strongly recommend you always use original LDR components as spare parts. Please refer to our technical assistance should you need to order and/or replace any part of the unit. 10 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
Arpa F & PC 150, 3200K and 5600K, DMX512 +RDM LED User’s Manual – 2.0 14. WARRANTY Our warranty covers all structural and manufacture defects from one year from the date you purchased this product. In case of complaints we strongly recommend you use the complaint form at the end of this manual or contact the local dealer who supplied the product to you. In any case please report the serial number of the product. 11 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
SLOW = ACTIVE NORMAL = 150ms; SLOW = 9 Smooth Dimmer response 300ms FAST = Immediate NORMAL response AUTO = regulated by Tled; 10 Fan Fan setting SILENT = slow speed, low noise; AUTO STEADY = constant speed ON; AutoOFF = LCD light off after 11 BackL LCD screen retro‐illumination AutoOff 1'30" 12 Tled Visualizes the LED temperature Select the LED Temp in °C or F° °C 13 SwVer Visualizes the software version ‐‐‐ ENCODER = Rotary switch; 14 Manu Selects the manual dimmer type ENCODER POTENT = External slider 12 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
161 ‐ 180 64% ‐ 71% Step Strobe speed 9 181 ‐ 200 72% ‐ 78% Strobe speed 10 (maximum Step 201 ‐ 220 79% ‐ 86% frequency) Step Closed 221 ‐ 255 87% ‐ 100% Table name: DMX512 Functions Date: Projector: ARPA White Edition: 1 chart 4 (16 bits + Strobe) 16/05/2018 Luci della Ribalta srl reserves the right to modify the present document without prior notice. 15 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it ...
Page 17
P .iva 01815640204 c.iso IT01815640204 Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo MN Italy - tel +39 0376 771777 - web www.ldr.it - email info@ldr.it IT/015/MN/11 VAT registration # It01815640204 - REA MN 198438 - Authorized Exporter #...
Page 18
Reklamationsformular ‐ formulaire de réclamation ‐ hoja de reclamaciones email: info@ldr.it Azienda ed Indirizzo ‐ Company's name and address ‐ Firmenname und Addresse ‐ Nom et adresse ‐ Nombre y direcciòn _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ Nome del rivenditore da cui il prodotto è stato acquistato ‐ Name of the dealer where you have purchased the product ‐ Namen der Firma, die Ihnen das Produkt verkauft hat ‐ Nom de la société qui vous a vendu ce produit ‐ Nombre de la compañia donde han comprado el producto: ____________________________________________________________________________________________________ 01151000 Arpa F150 W RDM, LED 3200K Prodotto difettoso 01151100 Arpa F150 C RDM, LED 5600K Faulty product 01152000 Arpa PC150 W RDM, LED 3200K Defekte s Produkt 01152100 Arpa PC150 C RDM, LED 5600K Produit défectueux Producto defectuoso DMX512+RDM Descrizione del problema /Problem found/Beschreibung des Defekts/Description du défaut/Descripciòn del problema ________________________________________________________________________________________________________ ________________________________________________________________________________________________________ ________________________________________________________________________________________________________ ________________________________________________________________________________________________________ Data d'acquisto ‐ Date of purchase ‐ Kaufdatum ‐ Date de l'achat ‐ Fecha de compra ________________________ Si prega di allegare prova d'acquisto ‐ Please attach copy of purchase invoice ‐ Bitte Kaufnachweis beilegen ‐ Veuillez joindre une quittance d'achat ‐ Les rogamos incluyan lcopia de la factura de compra. Nome e qualifica ‐ Name and position ‐ Name und Funktion ‐ Nom et fonction ‐ Nombre y cargo ____________________________________________________________________ Data ‐ Date ‐ Datum ‐ Date ‐ Fecha _____________________________...
Page 19
local de escoamento de residuos, ou a loja na qual efectuou a compra. Richtlinie 2002/96/EU (Elektro- und Elektronik- Altgeräte - WEEE): Benutzerinformationen. Dieses Produkt entspricht Richtlinie WEEE-symbolet (Waste Electrical 2002/96/EU. Das Symbol des auf dem Gerät Electronic Equipment). dargestellten, durchgestrichenen Korbes gibt an, dass Bruken av WEEE-symbolet indikerer at dette Produkt Ende...
Page 20
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo mn Italy. tel +39 0376 771 777 ‐ fax +39 0376 772 140 ‐ email info@ldr.it...
Need help?
Do you have a question about the Arpa F150 W RDM, LED and is the answer not in the manual?
Questions and answers