5-11 Sas/Serial Ata/Pci-E Connections - Supero FatTwin F628R2-FC0 User Manual

Chapter 5: Advanced Serverboard Setup

5-11 SAS/Serial ATA/PCI-E Connections

Serial ATA Ports
There are six Serial ATA Ports (I-SATA0~I-
SATA 5) located on the serverboard.
These SATA ports are supported by
the Intel PCH. In addition, four S-SATA
connectors (S-SATA0-3), supported
by Intel SCU, are also located on the
serverboard. S-SATA 2/3 support SATA
DOMs (Devices on the modules) that
contains the power pins. All SATA ports
provide serial-link signal connections,
which are faster than the connections of
Parallel ATA. See the table on the right
for pin defi nitions.
Notes: For more information on SATA HostRAID configuration, please
refer to the Intel SATA HostRAID User's Guide posted on our website @
http://www.supermicro.com.
SAS Ports (X10DRFF-C Only)
Eight SAS Ports, supported by LSI
SAS 3008 SAS controller, are located
on the serverboard. L-SAS 0-3 and
L-SAS 4-7 support serial-link signal
connections. See the table on the right
for pin defi nitions.
Notes: For more information on SAS RAID confi guration, please refer to the LSI
MegaRAID User's Guide posted on our website @ http://www.supermicro.com.
PCI-Express 3.0 x16 Slots
Two PCI-Express 3.0 x16 slots (CPU1_
Slot1/CPU2_Slot2) are located at
JPCIE1/JPCIE2 on the serverboard.
This slots support PCI-Express 3.0
connections. Refer to the layout below
for the locations.
5-23