Table of Contents
Advertisement
Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
There are four motherboard drawer nodes per system.
Processors
Two E5-2600v3 series processors per node in Socket R3 LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One PCH C612 chipset per node
BIOS
16 MB AMI SPI BIOS® Flash ROM Flash EEPROM per node
Memory Capacity
The X10DRFF-C's integrated memory controller supports up to eight (8) DIMM slots
supporting up to 512 GB of DDR4-2133/1866/1600 MHz speed LRDIMM registered
ECC or 256 GB of DDR4-2133/1866/1600 MHz speed RDIMM SDRAM in up to
1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB or 64 GB (LRDIMM only) size at 1.20V,
1.35V or 1.5V voltages per node.
Note: refer to Section 5-5 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SAS/SATA Drive Bays
Each node of the FatTwin F628R2-FC0 contains eight (8) hot-swap drive bays to
house standard 2.5" SAS/SATA drives
PCI Expansion
The FatTwin F628R2-FC0 has 1x PCI-E 3.0 x16 low-profi le slot available per
node.
Serverboard
X10DRFF-C serverboard (proprietary form factor)
Dimensions: (LxW) 18.724" x 8.539" x (475.59 mm x 216.87 mm)
B-1
Advertisement
Table of Contents
